Windows protection error in windows me

You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser. Windows Protection Error. Status Not open for further replies. Please restart computer. Pls help me Start your computer in Safe mode. For information about how to start your computer in Safe mode, view one of the following sections, depending on your operating system.

If you do not receive the error message when you start your computer in Safe mode or when you shut down your computer from Safe mode If Windows 98 starts in Safe mode, step through the startup process to see if any devices do not load properly: 1.

Click Selective Startup. Try different boot options. The following table lists several startup options. To use a boot option, click the appropriate check boxes to select or clear them. Follow the instructions below the table to determine the cause of your problem. BAT file. First, try the Boot A option. If Windows 98 does not start normally under these conditions, try the Boot B option.

If Windows 98 does start normally using the Boot A option, there is a problem in the System. To find which line in the System. Click the Win. Double-click the Windows folder. Click OK. When you are prompted to restart your computer, click Yes. If Windows 98 starts normally using the Boot B option, there is a problem with a driver or terminate-and-stay-resident TSR program being loaded from the Config.

In such a case, I recommend reinstalling Windows to see if the problem goes away, and scanning for viruses. When Iomega originally introduced the parallel port based Zip drives, printers that required bi-directional parallel port support either did not exist or were not widely used. There are a couple of different tricks that you can use to overcome this particular Windows protection error.

The technique for doing so varies from computer to computer, but on a machine with an Intel Pentium 4 motherboard, you must press the F1 key during the early stages of the boot process to load the BIOS Setup Utility.

Once this utility loads, select the Peripheral Configuration option from the Advanced menu. Now, locate the Parallel Port option on the Peripheral Configuration screen. An alternative fix Another way that you can fix the problem is to disable bi-directional printing support through Windows rather than through the CMOS.

To do so, click the Start button, and then select the Printers command from the Settings menu. Upgrading is the ultimate fix Finally, the best way to fix a Windows protection error is to simply upgrade the operating system to Windows or Windows XP. This is obviously the most effective fix because Windows protection errors occur only in Windows 95, 98, and ME. Upgrading the operating system will likely correct other types of Windows protection errors too, such as those caused by damaged files or by an invalid registry entry.

For example, errors caused by the CMOS or BIOS are independent of the operating system and will likely cause problems regardless of what operating system the machine is running. Editor's Picks. The best programming languages to learn in Check for Log4j vulnerabilities with this simple-to-use script. There's no problem with the Store itself, however. So I ran the commands in Command Prompt as an administrator, and encountered some errors while trying to register the following:.

I still click on menu items in the Windows Security menu, and it still prompts me to look for an app on the Windows Store as if I don't really have Windows Defender on my computer. Done, still didn't resolve the issue.

Verification and restoration both completed with no problems. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. I am here to help you today. This is fairly simple, and it requires running just one single command.

Open WSReset. How satisfied are you with this reply?