Pilote installation epson stylus c42ux

Mail : Katella Ave. Los Alamitos, CA Epson Stylus C42UX. Downloads not available on mobile devices. Operating System: Windows 10 bit Windows 10 bit Windows 8. Printer Driver Windows 10 In-box. Description : Windows 10 drivers for this product are installed automatically when you power-on and connect your printer to your Windows 10 computer. Compatible systems : Windows 10 bit, Windows 10 bit.

Top FAQs. Select the questions to view the answers What is the correct way to load transparency paper? How do I replace an ink cartridge? How do I know when an ink cartridge needs to be replaced? Can I print in black if the color cartridge is empty or visa versa?

Nothing prints. What should I do? Which ink cartridges should I use with my product? My product is printing blank pages from Windows or my Mac. How can I stop my product from feeding multiple pages at the same time? The product will not initialize. The quality of my printed output is unacceptable. Copy or Print. Select the questions to view the answers Nothing prints. When I try to print to my product in Windows 7, printing is slow or my product stops printing.

Does OS X support manual duplex printing with my product? Error Messages or Lights. Select the questions to view the answers I tried to print before turning my product on, then clicked Retry after turning on my product, and now I get an Out of Paper message.

I'm getting a memory error message when I try to print from my Mac. How do I replace an ink cartridge? How do I know when an ink cartridge needs to be replaced?

Can I print in black if the color cartridge is empty or visa versa? Nothing prints. What should I do? Which ink cartridges should I use with my product? My product is printing blank pages from Windows or my Mac. How can I stop my product from feeding multiple pages at the same time? The product will not initialize.

The quality of my printed output is unacceptable. Copy or Print. Select the questions to view the answers Nothing prints. When I try to print to my product in Windows 7, printing is slow or my product stops printing. Does OS X support manual duplex printing with my product? Error Messages or Lights. Select the questions to view the answers I tried to print before turning my product on, then clicked Retry after turning on my product, and now I get an Out of Paper message.

I'm getting a memory error message when I try to print from my Mac. Select the questions to view the answers When I try to print, the Print box automatically goes to the Fax mode and I don't even have a fax. Select the questions to view the answers Which ink cartridges should I use with my product? How long should an ink cartridge remain in my product if it's not used often?

Can the Epson ink cartridges be refilled or can I use third-party ink cartridges without voiding the warranty? I brought my product with me to a different country and can't find ink for it. My product is out of color ink even though I print in black only. Why does this happen?

Paper or Media. Q: How do I uninstall the printer driver from my Macintosh? Q: What should I do to reinstall the printer software in my Macintosh? Q: Why can't I print from a particular Windows application in color? Return to the index Macintosh Questions Q: What are the system requirements to use this printer with a Macintosh?

Q: Will this printer work on a LocalTalk network? Q: A portion of my image doesn't print when I'm printing from my Macintosh. Q: Whenever I try to print from my Macintosh, I get a type 11 error and my system locks up. What's wrong? Q: Why am I getting a memory error message when I try to print from my Macintosh? What should I do? Q: Nothing prints. Q: The printer sounds like it is printing, but no ink is on the paper.

How can I resolve this issue? Q: Vertical lines are not aligned or vertical banding appears. How can I correct this? Q: How can I stop the printer from feeding multiple pages at the same time? Q: Sometimes the paper doesn't eject all the way or is wrinkled.

Q: Why are my margins incorrect? Q: What error conditions are indicated by the printer's lights? Q: All lights are off. Why won't the printer initialize? Q: Why does the image look inverted, as if viewed in a mirror? Q: Is there a printer self test to determine if a problem is caused by the printer?

Return to the index Printing Questions Q: The colors of my image on my monitor do not match the output from my printer. What is wrong? Q: The quality of my printed output is unacceptable.

What can I do to improve this? Q: What should I do if the printed image has horizontal banding? Q: I tried to print before turning the printer on, then clicked Retry after turning on the printer, and now I get an "Out of Paper" message. How can I fix this? Q: When I try to print, the Print box automatically goes to the Fax mode and I don't even have a fax. Q: Can this printer be setup to print in Black by default instead of Color? Q: After printing something in the landscape mode I can't change to portrait mode.

What can I do? Q: Why does my printer print out blank pages? Return to the index Media Questions Q: How do you select the correct media type? Q: How should I preserve my pictures? Q: Can I use the cleaning sheets that are included with any special media I purchase? Q: Can I use sheet labels with this printer? Q: What is the correct way to load transparency paper? Q: Does this printer support borderless printing? Make sure both the printer and computer are turned off.

Then disconnect the interface cable from the printer. Make sure letter-size paper is loaded in the printer. Hold down the Maintenance button and turn on the printer. Continue holding down the Maintenance button until the Power light starts to flash, then release it. The printer prints one page showing its ROM version number, ink counter, and a nozzle check pattern. Each black and colored block pattern should be complete, with no stripes running through it.

If the printed blocks have stripes, you need to clean the print head. To end the check, turn off the printer after it prints the check page. Then reconnect the interface cable and turn on your printer and computer. If the check page prints, the problem probably lies in your software settings, the interface cable, or your computer. If the check page doesn't print, you may have a problem with your printer.

A: Epson's Micro Piezo M. Micro Piezo technology provides the highest resolution, smallest dot size, precise dot volume, precise dot shape, precise dot placement, and fastest head firing times. Thermal technology creates satellites and misting which Micro Piezo technology eliminates. Return to the index Q: Where can I find the printer manual? Return to the index Q: Which operating systems does this printer work with?

Return to the index Q: Which computer interfaces does the printer support? Macintosh OS 9. Return to the index Q: What steps need to be taken when transporting the Printer?

A: If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size.

To avoid damage, always leave the ink cartridges installed when transporting the printer. Be sure to remove the tape used in step 4 after installing the printer in its new location. Follow these steps: 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer.

Unplug the power cord from the electrical outlet. Then disconnect the printer cable from the printer. Remove any paper from the printer and remove the paper support. Open the printer cover. Secure the ink cartridge holder to the printer with tape, then close the printer cover. Push in the output tray extension and close the tray. If possible, repack the printer and attachments in the original box using the protective materials that came with it. See the Start Here sheet.

Be sure to keep the printer level as you transport it. After transporting the printer, carefully remove the tape securing the print head and then print a document to test the output. If you notice a decline in print quality, clean the print head; if output is misaligned, align the print head.

Return to the index Q: Does this printer support Adobe Postscript fonts? A: No, this printer does not support Adobe Postscript. If printing postscript files is going to be a major portion of your printing, then you may want to consider purchasing one of our Epson printers capable of printing postscript files when used with our optional Stylus RIP software.

Please contact our pre-sales department at for more information. Return to the index Q: Does this printer work with Windows 3. Return to the index Q: What should I do to stop a print job and clear the printer's buffer? A: Make sure that you cancel the print job from the computer before you try to clear the printer's memory.

After canceling the print job from the computer and the printer is no longer printing, turn off the printer, wait 10 seconds, and then turn the printer on again. Return to the index Q: What is the proper way to turn off the printer?

A: Wait until the printer stops printing and use the printer's power button. Never use an external switch, such as a power strip, surge protector, or power protector, to turn off the printer, as the print heads will not be in the proper position.

It can be harmful to your printer if you turn the printer off using an external switch. Return to the index Q: How can I obtain the latest printer drivers?

A: The easiest and fastest way to get the latest printer driver software, is to download it from the downloads section of this web site. A shipping and handling charge may be applied to drivers sent by mail. Note: This number is not for technical support. A: Turn on your printer, then turn on your computer and wait until you see your desktop icons and the cursor is no longer an hourglass style.

If you see a "New Hardware Wizard" screen, cancel it and continue with the following steps. Don't select any other icon in the folder. Select 'English', then read the license agreement and click 'Agree'.

Wait while files are copied to your computer. If you see a screen telling you to make sure the printer is connected and turned on, make sure it's connected and turned on. Wait for a minute for the screen to disappear. When you see a message that setup is complete, click 'OK'. At the last screen, click 'Done' or close your browser. Click 'Install Adobe Reader' and follow the on-screen instructions if you don't have it on your computer.

When you're done, click 'Back' to return to the Main Menu, then exit to close it. Return to the index Q: How do I remove the printer driver from Windows? Double-click My Computer, then double-click the Control Panel icon. Then follow the on-screen instructions. Restart your computer when you're done. A: You can reinstall your printer software over your currently installed printer software. Other Windows systems: Double-click My Computer on your desktop.

Double-click Setup. You see this screen: 5. Click Reinstall Printer Driver. Then follow the instructions on the screen to reinstall your driver. Make sure your printer is on, then turn on your Macintosh and wait until you see your desktop icons. Read the license agreement and click Agree. You see the Main Menu. Click 'Install Printer Driver'. Click 'Install' on the installer screen and follow the on-screen instructions to complete the installation your printer driver and restart your Macintosh.

You may have to double-click the Epson icon to open the main menu. When you're done, click 'Back' to return to the Main Menu then 'Exit' to close it. Open the Chooser from the Apple menu. Close the Chooser and you're ready to start printing. Make sure your printer is on, then turn on your Macintosh in OS X and wait until you see your desktop icons. If you set up an administrator password when you installed OS X click the password icon and enter you administrator password, then click 'OK'.

At the next screen, click 'Continue'. Read the license agreement and click 'Continue' and click 'Agree'. Select the OS X drive where you want to install your printer software, then click 'Continue'. Click 'Install' on the Easy Install screen, and follow the on-screen instructions to install the printer software and restart your Macintosh.

Double-click the 'Applications' folder on your hard drive.